EB2 Room 3002 Instructions

To start:

  • Plug in the computer to activate the Creston system. Cords are located on the cabinet under the monitor.
  • Note: For a Mac, you will need to plug the white Smart Tech cord into your laptop and then connect it to the black cord that is in the wall. For sound, you will need to connect the audio cord to your headphone port.
  • To place an audio call, dial the number on the keypad.
  • To adjust volume, press volume up and volume down on the tablet.

During an audio conference, the two presenter mics will broadcast both over the room speakers and on the conference call. The two presenter mics have lanyards attached to them. To turn mics on, press and hold the front button until you hear the microphone beep. Be sure that the mics are flashing green to make sure they are on.  

There are table microphones on the cabinet to place around the room when making a conference call. To turn mics on, press and hold the front button until you hear the microphone beep. Be sure that the mics are flashing green to make sure they are on. The table microphones will broadcast on the conference call only. Make sure they are all plugged back into the dock before you leave.

The room has a call-system, this is the phone number if someone wants to dial in: 919-513-0800